fbpx

Do’s:

  1. Check Your Setup Every Time:
    • Before starting, make sure your rotary table is set up right—aligned, secured, and calibrated. A small mistake here can lead to big problems later.
  2. Secure Your Workpiece Properly:
    • Always double-check that your workpiece is tightly clamped to the rotary table. If it moves during machining, your precision goes out the window.
  3. Use the Right Tools for the Job:
    • Make sure you’re using tools designed for rotary table operations. The right tooling keeps your process smooth and accurate.
  4. Keep the Table Clean:
    • Chips and dust can mess with precision, so regularly clean the table. A little housekeeping can go a long way in maintaining accuracy.
  5. Watch Your Speed and Load:
    • Run the rotary table at the correct speed and load capacity for the material you’re working with. Pushing it too hard can lead to errors and damage.
  6. Perform Regular Maintenance:
    • Keep up with regular lubrication and inspection. Well-maintained machines deliver consistent, accurate results.

 

 

Don’ts:

  1. Don’t Overload the Table:
    • Every rotary table has a weight limit. Don’t push it past its capacity—it can cause misalignment, wear out parts, or even break the table.
  2. Don’t Ignore Alignment:
    • Skipping the alignment step is a bad idea. Misalignment will ruin your precision, and you could end up scrapping your part.
  3. Don’t Forget the Warm-up:
    • Always run a warm-up cycle before starting work. Cold machines can’t deliver the accuracy needed for high-precision machining.
  4. Don’t Use Worn-Out Tools:
    • Dull or damaged tools won’t cut accurately and could damage both the workpiece and the rotary table. Replace tools when necessary.
  5. Don’t Ignore Strange Sounds:
    • If you hear weird noises or feel vibrations, stop the machine and investigate. Running it without checking could lead to bigger, more expensive issues.
  6. Don’t Rush Setup:
    • Precision machining is all about detail. Take your time during setup. Rushing increases the risk of errors and downtime later on.

 

Following these do’s and don’ts will help you get the most out of your CNC rotary table, ensuring better precision and longer equipment life. Consistent maintenance, careful setup, and using the right tools are key to success in precision machining.

 

Ready to Get Precision Right?

If you’re looking to upgrade or maintain your CNC rotary tables and spindles, Kuvam Technologies offers high-quality solutions designed for maximum precision and efficiency. Contact us today to learn more about how we can support your machining needs!